**•How To Make Skyrim Run Better On PS3!•**
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves आप have. If आप have और then three, मिटाइए them. आप must only have three saves maximum. Also make sure to मिटाइए any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs आप have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will दिखाना आप how many GBs आप have used and how much अंतरिक्ष आप have left. e.g: 233/320GB. The number on the left will दिखाना how many GBs आप have left. If आप don't have much, scroll across the XMB to "Game Data Utility" and मिटाइए any game's data that आप aren't playing anymore/lately. Don't worry, Game data is only "install data," when आप decide to play the game again आप will just have to install again and your saves will not be affected. If आप also want to copy & मिटाइए game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If आप have important saves, don't worry about them. Saves take up hardly any अंतरिक्ष compared to "Game Data." If आप want to free-up as much अंतरिक्ष as possible, आप can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way आप can मिटाइए them off of आप system and just copy them back from the USB when आप want to play them again. #NOTE# आप can copy some "Game Data Utility" as well as "Save Data Utility" if आप want to do both. Make sure आप have as much अंतरिक्ष as possible because Skyrim needs quite a bit of HDD अंतरिक्ष to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, आप will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" या "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if आप haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease लोडिंग times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying या terribly unplayable? Most likely it'll either be worse या a even a tiny bit better than it was before आप changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings आप disabled.
#NOTE# After this आप can restart the system again if आप want to. आप do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This लेख is by:
~*•Žÿłįçę*•~
Tired of the game-breaking lag with your 20meg Skyrim save files? Here is a guide to help prevent these issues:
1) "Deleting Excess Save Files"
•Go to "Save Data Utility" on the XMB & check how many Skyrim saves आप have. If आप have और then three, मिटाइए them. आप must only have three saves maximum. Also make sure to मिटाइए any "Auto-Saves."
2) "Freeing Up HDD Space"
•Check how many GBs आप have left on your console. Go to "Settings," "System Setting" & then open "System Information." It will दिखाना आप how many GBs आप have used and how much अंतरिक्ष आप have left. e.g: 233/320GB. The number on the left will दिखाना how many GBs आप have left. If आप don't have much, scroll across the XMB to "Game Data Utility" and मिटाइए any game's data that आप aren't playing anymore/lately. Don't worry, Game data is only "install data," when आप decide to play the game again आप will just have to install again and your saves will not be affected. If आप also want to copy & मिटाइए game saves, scroll down from "Game Data Utility" and select "Save Data Utility." If आप have important saves, don't worry about them. Saves take up hardly any अंतरिक्ष compared to "Game Data." If आप want to free-up as much अंतरिक्ष as possible, आप can plug a USB into the PS3 and copy "non-copy-protected" saves to your thumb drive. That way आप can मिटाइए them off of आप system and just copy them back from the USB when आप want to play them again. #NOTE# आप can copy some "Game Data Utility" as well as "Save Data Utility" if आप want to do both. Make sure आप have as much अंतरिक्ष as possible because Skyrim needs quite a bit of HDD अंतरिक्ष to run properly. My Skyrim Game Data is about 4-5 GBs.
2) Tweaking "Game & Display Settings"
•Sometimes "Graphical Enhancement" settings can interfere with gameplay performance such as frame-rate dips, glitches & lag in massive games like Skyrim. (Don't worry, आप will be changing these settings back later!)
#Temporarily Disable The Following:
*Go to "Game Settings" and turn "PS Smoothing" to "Off."
*Scroll down to "Display Settings" and disable/limit all the HDMI Features:
- Super White
- RGB Range to "Limited."
- Cross-Colour Reduction Filter
- Deep Colour Output
3) "Permanently Disabling All In-Game Auto Saves & Testing Performance"
•After you've put all of the ^ *above settings to either "off" या "limited," insert your Skyrim disc and load it up.
Once the game has loaded, go to setting and disable all Auto-Saves listed below (if आप haven't already.)
*Save on Wait
*Save on Fast Travel
*Save on Rest
*Save on Character Menu
^ *This will prevent in-game stuttering when your system forces your game to save automatically. It may also decrease लोडिंग times significantly as well as preventing auto-save files from filling up your load & save menus.
4) "System Restart & Re-Enabling Settings"
•When you've disabled all of the "Auto-Save" options, exit the menu and test how your game is running. Is it good, OK, annoying या terribly unplayable? Most likely it'll either be worse या a even a tiny bit better than it was before आप changed the settings. If it's at least a little better, it'll probably still be, well...BAD!
Don't worry! A system restart and another change of settings should fix that right up!
*Quit the game and turn the PS3 off then on again.
*When the PS3 has turned on again, go to back to "Game" and "Display Settings" to re-enable the settings आप disabled.
#NOTE# After this आप can restart the system again if आप want to. आप do not have to.
With your re-enabled "Graphic Settings," load up Skyrim again and enjoy the (at least temporary) smoother, consistent frame-rate & a lot less lag! ;) *^_^*
This लेख is by:
~*•Žÿłįçę*•~
